ทำเหล็กทำด้วยเหล็ก 70% Ferro Titanium

ทำเหล็กทำด้วยเหล็ก 70% Ferro Titanium

การทำเหล็ก Ferro Titanium 70% ถูกใช้เป็น deoxidizer, desulfurizer, degasser และตัวแทนผสม ในกระบวนการทำเหล็กเป็นองค์ประกอบโลหะผสมมันสามารถปรับแต่งโครงสร้างและธัญพืชแก้ไของค์ประกอบช่องว่าง (C, N) และปรับปรุงความแข็งแรงของเหล็ก ความสามารถในการ deoxidation ของไทเทเนียมนั้นสูงกว่าของซิลิคอนและแมงกานีสมากและสามารถลดการแยกของกราดปรับปรุงคุณภาพของแท่งและเพิ่มผลผลิต
ส่งคำถาม
คำอธิบาย

Ferrotitanium ในตลาดต่างประเทศ

 

ในตลาดต่างประเทศสูง - คุณภาพสูง - ไทเทเนียม ferrotitanium เป็นที่ต้องการอย่างมาก ปัจจุบันมีคุณภาพสูงที่มีคุณภาพสูงโดยมีเนื้อหาไทเทเนียม (W (TI)) ของ 68 - 72%, เนื้อหาอลูมิเนียม (W (AL)) <4.0%, ปริมาณซิลิกอน (W (SI)) <0.5% (W (s)) <0.015%, ปริมาณฟอสฟอรัส (W (p)) <0.02%และปริมาณออกซิเจนทั้งหมด (W (ถึง)) <1.0% ประเภทของ titanium ferrotitanium ประเภทนี้มักจะผลิตโดยวิธีไทเทเนียม - remelting

 

In China, although some manufacturers also use this method to produce high - titanium ferrotitanium, the cost is relatively high. In order to reduce the cost of steel - making, domestic steel enterprises appropriately relax the requirements when purchasing high - titanium ferrotitanium. For example, the high - titanium ferrotitanium used by W factory to produce IF steel requires: w(Ti)>65%, W (Al)<4.5%, w(Si)<0.5%, w(TO)<5.0%. As the quality requirements of steel continue to increase and the variety of steel expands, the demand for the quality and variety of ferrotitanium is also increasing. However, currently, most domestic ferroalloy plants only produce ordinary medium - and low - titanium ferrotitanium, and few manufacturers formally produce high - titanium ferrotitanium with w(Ti) = 65% - 75% and w(Al) ≤ 4%. With the development of the global steel industry and the continuous improvement of steel quality standards, the international market's demand for high - quality ferrotitanium is expected to continue to grow, which also poses challenges and opportunities for the development of the ferrotitanium industry.

 

คำอธิบาย Ferrotitanium

 

ชื่อผลิตภัณฑ์

เฟอร์โรติเนียม

ส่วนประกอบเคมี Ti

25-35% , 65-75%

ข้อมูลจำเพาะ

10-100 มม. 10-50 มม.

แอปพลิเคชัน

ผงโลหะขั้วไฟฟ้าเชื่อม ฯลฯ

 

product-800-561

 

คำถามที่พบบ่อย

 

ถาม: คุณมีการควบคุมคุณภาพหรือไม่?
ตอบ: ใช่เราได้รับการรับรองความถูกต้องของ SGS

ถาม: เวลาจัดส่งของคุณนานแค่ไหน?
ตอบ: โดยทั่วไปคือ 7-14 วันถ้าสินค้าอยู่ในสต็อก หรือเป็น 25-45 วันหากสินค้าไม่ได้อยู่ในสต็อกมันเป็นไปตามปริมาณ

ถาม: เราจะได้รับตัวอย่างหรือไม่?
ตอบ: ใช่เราสามารถเสนอตัวอย่างฟรี แต่อย่าจ่ายค่าขนส่ง หากคุณสั่งซื้อหลังจากยืนยันตัวอย่างเราจะคืนเงินค่าขนส่งด่วนของคุณหรือหักจากจำนวนการสั่งซื้อ

ถาม: เงื่อนไขการชำระเงินของคุณคืออะไร?
A: เงินฝาก 30% T/T, ยอดคงเหลือ 70% โดย T/T หรือ L/C ก่อนการจัดส่ง

ป้ายกำกับยอดนิยม: เหล็กทำ 70% Ferro Titanium, China Steel ทำให้ผู้ผลิต Ferro Titanium 70%, ซัพพลายเออร์, โรงงาน